Heat Printing Instructions

Ensure your heat press is clean and free from any debris or residue.
Pre-heat the press to the recommended temperature for DTF printing (typically around 310°F to 320°F. 

Pre-press the fabric to remove moisture and wrinkles. Position the DTF print on the fabric with the printed side facing down.
Place a non-stick protective sheet or parchment paper over the DTF print to prevent any ink transfer to the heat press.  Press the transfer around 8-10 seconds, medium to heavy pressure.  Warm to cool peel.  If the design starts to lift as you peel the film, lay the film back down and let cool more.  For optimal results, cover with butcher or parchment paper for 3-5 seconds This helps set the ink and enhance durability.  You should see the texture of the garment in the transfer to ensure it is fully transferred to your garment.  

Wait at least 24 hours before washing the printed garment.
Machine wash inside out in cold water using a mild detergent.
Avoid using bleach or fabric softeners.
Tumble dry on low heat or air dry for best results.

Video